diff options
Diffstat (limited to 'fedora/.local/bin/htop-vim/README')
| -rw-r--r-- | fedora/.local/bin/htop-vim/README | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/fedora/.local/bin/htop-vim/README b/fedora/.local/bin/htop-vim/README new file mode 100644 index 0000000..f90f463 --- /dev/null +++ b/fedora/.local/bin/htop-vim/README @@ -0,0 +1,230 @@ +# [](https://htop.dev) + +[](https://github.com/htop-dev/htop/actions) +[](https://scan.coverity.com/projects/21665) +[](https://groups.io/g/htop) +[](https://web.libera.chat/#htop) +[](https://github.com/htop-dev/htop/releases/latest) +[](https://repology.org/project/htop/versions) +[](COPYING?raw=true) + + + +## Introduction + +`htop` is a cross-platform interactive process viewer. + +`htop` allows scrolling the list of processes vertically and horizontally to see their full command lines and related information like memory and CPU consumption. +Also system wide information, like load average or swap usage, is shown. + +The information displayed is configurable through a graphical setup and can be sorted and filtered interactively. + +Tasks related to processes (e.g. killing and renicing) can be done without entering their PIDs. + +Vim keybindings +---------------- + +These are the keybindings added in this fork of htop: + +``` + g to the top (gg in vim) + + <C-b> up 1 page + + <C-u> up 1/2 page + + k + +h l one character + + j + + <C-d> down 1/2 page + + <C-f> down 1 page + + G to the end + +-------------------------------------------------- + + o Expand/collapse (like in NERDTree) +``` + +In order to accomodate these keybindings, the following changes +were made to the original keybindings: + +* Ctrl+F and Ctrt+B can no longer be used to navigate horizontally +* 'h' can no longer be used to access the help, leaving Ctrl+F1 & '?' +* 'k' can no longer be used to kill processes, being replaced with 'x' +* 'l' can no longer be used to list open files, being replaced with 'L' +* 'x' can no longer be used to list file locks, being replaced with 'X' + + +Comparison between `htop` and classic `top` +------------------------------------------- + +Running `htop` requires `ncurses` libraries, typically named libncurses(w). + +`htop` is written in C. + +For more information and details visit [htop.dev](https://htop.dev). + +## Build instructions + +### Prerequisite +List of build-time dependencies: + * standard GNU autotools-based C toolchain + - C99 compliant compiler + - `autoconf` + - `automake` + - `autotools` + * `ncurses` + +**Note about `ncurses`:** +> `htop` requires `ncurses` 6.0. Be aware the appropriate package is sometimes still called libncurses5 (on Debian/Ubuntu). Also `ncurses` usually comes in two flavours: +>* With Unicode support. +>* Without Unicode support. +> +> This is also something that is reflected in the package name on Debian/Ubuntu (via the additional 'w' - 'w'ide character support). + +List of additional build-time dependencies (based on feature flags): +* `sensors` +* `hwloc` +* `libcap` (v2.21 or later) +* `libnl-3` + +Install these and other required packages for C development from your package manager. + +**Debian/Ubuntu** +~~~ shell +sudo apt install libncursesw5-dev autotools-dev autoconf automake build-essential +~~~ + +**Fedora/RHEL** +~~~ shell +sudo dnf install ncurses-devel automake autoconf gcc +~~~ + +**Archlinux/Manjaro** +~~~ shell +sudo pacman -S ncurses automake autoconf gcc +~~~ + +**macOS** +~~~ shell +brew install ncurses automake autoconf gcc +~~~ + +### Compile from source: +To compile from source, download from the Git repository (`git clone` or downloads from [GitHub releases](https://github.com/htop-dev/htop/releases/)), then run: +~~~ shell +./autogen.sh && ./configure && make +~~~ + +### Install +To install on the local system run `make install`. By default `make install` installs into `/usr/local`. To change this path use `./configure --prefix=/some/path`. + +### Build Options + +`htop` has several build-time options to enable/disable additional features. + +#### Generic + + * `--enable-unicode`: + enable Unicode support + - dependency: *libncursesw* + - default: *yes* + * `--enable-affinity`: + enable `sched_setaffinity(2)` and `sched_getaffinity(2)` for affinity support; conflicts with hwloc + - default: *check* + * `--enable-hwloc`: + enable hwloc support for CPU affinity; disables affinity support + - dependency: *libhwloc* + - default: *no* + * `--enable-static`: + build a static htop binary; hwloc and delay accounting are not supported + - default: *no* + * `--enable-debug`: + Enable asserts and internal sanity checks; implies a performance penalty + - default: *no* + +#### Performance Co-Pilot + + * `--enable-pcp`: + enable Performance Co-Pilot support via a new pcp-htop utility + - dependency: *libpcp* + - default: *no* + +#### Linux + + * `--enable-sensors`: + enable libsensors(3) support for reading temperature data + - dependencies: *libsensors-dev*(build-time), at runtime *libsensors* is loaded via `dlopen(3)` if available + - default: *check* + * `--enable-capabilities`: + enable Linux capabilities support + - dependency: *libcap* + - default: *check* + * `--with-proc`: + location of a Linux-compatible proc filesystem + - default: */proc* + * `--enable-openvz`: + enable OpenVZ support + - default: *no* + * `--enable-vserver`: + enable VServer support + - default: *no* + * `--enable-ancient-vserver`: + enable ancient VServer support (implies `--enable-vserver`) + - default: *no* + * `--enable-delayacct`: + enable Linux delay accounting support + - dependencies: *pkg-config*(build-time), *libnl-3* and *libnl-genl-3* + - default: *check* + + +## Runtime dependencies: +`htop` has a set of fixed minimum runtime dependencies, which is kept as minimal as possible: +* `ncurses` libraries for terminal handling (wide character support). + +### Runtime optional dependencies: +`htop` has a set of fixed optional dependencies, depending on build/configure option used: + +#### Linux +* `libdl`, if not building a static binary, is always required when support for optional dependencies (i.e. `libsensors`, `libsystemd`) is present. +* `libcap`, user-space interfaces to POSIX 1003.1e capabilities, is always required when `--enable-capabilities` was used to configure `htop`. +* `libsensors`, readout of temperatures and CPU speeds, is optional even when `--enable-sensors` was used to configure `htop`. +* `libsystemd` is optional when `--enable-static` was not used to configure `htop`. If building statically and `libsystemd` is not found by `configure`, support for the systemd meter is disabled entirely. + +`htop` checks for the availability of the actual runtime libraries as `htop` runs. + +#### BSD +On most BSD systems `kvm` is a requirement to read kernel information. + +More information on required and optional dependencies can be found in [configure.ac](configure.ac). + +## Usage +See the manual page (`man htop`) or the help menu (**F1** or **h** inside `htop`) for a list of supported key commands. + +## Support + +If you have trouble running `htop` please consult your operating system / Linux distribution documentation for getting support and filing bugs. + +## Bugs, development feedback + +We have a [development mailing list](https://htop.dev/mailinglist.html). Feel free to subscribe for release announcements or asking questions on the development of `htop`. + +You can also join our IRC channel [#htop on Libera.Chat](https://web.libera.chat/#htop) and talk to the developers there. + +If you have found an issue within the source of `htop`, please check whether this has already been reported in our [GitHub issue tracker](https://github.com/htop-dev/htop/issues). +If not, please file a new issue describing the problem you have found, the potential location in the source code you are referring to and a possible fix if available. + +## History + +`htop` was invented, developed and maintained by [Hisham Muhammad](https://hisham.hm/) from 2004 to 2019. His [legacy repository](https://github.com/hishamhm/htop/) has been archived to preserve the history. + +In 2020 a [team](https://github.com/orgs/htop-dev/people) took over the development amicably and continues to maintain `htop` collaboratively. + +## License + +GNU General Public License, version 2 (GPL-2.0) or, at your option, any later version. |