1 files changed, 343 insertions, 0 deletions
diff --git a/mac/.config/mpv/script-opts/SmartCopyPaste_II.conf b/mac/.config/mpv/script-opts/SmartCopyPaste_II.conf
new file mode 100644
index 0000000..d0fd99a
--- /dev/null
+++ b/mac/.config/mpv/script-opts/SmartCopyPaste_II.conf
@@ -0,0 +1,343 @@
+######----Settings For SmartCopyPaste_II 3.1----######
+####------Script Settings-----####
+
+#--auto is for automatic device detection, or manually change to: windows or mac or linux
+device=auto
+
+#--copy command that will be used in Linux. OR write a different command
+linux_copy=xclip -silent -selection clipboard -in
+
+#--paste command that will be used in Linux. OR write a different command
+linux_paste=xclip -selection clipboard -o
+
+#--copy command that will be used in MAC. OR write a different command
+mac_copy=pbcopy
+
+#--paste command that will be used in MAC. OR write a different command
+mac_paste=pbpaste
+
+#--powershell is for using windows powershell to copy. OR write the copy command, e.g:clip
+windows_copy=powershell
+
+#--powershell is for using windows powershell to paste. OR write the paste command
+windows_paste=powershell
+
+#--Auto run the list when opening mpv and there is no video / file loaded. 'none' for disabled. Or choose between: all, copy, paste, recents, distinct, protocols, fileonly, titleonly, timeonly, keywords.
+auto_run_list_idle=none
+
+#--hides OSC idle screen message when opening and closing menu (could cause unexpected behavior if multiple scripts are triggering osc-idlescreen off)
+toggle_idlescreen=no
+
+#--change to 0 so item resumes from the exact position, or decrease the value so that it gives you a little preview before loading the resume point
+resume_offset=-0.65
+
+#--yes is for displaying osd messages when actions occur. Change to no will disable all osd messages generated from this script
+osd_messages=yes
+
+#--yes is for marking the time as a chapter. no disables mark as chapter behavior.
+mark_clipboard_as_chapter=no
+
+#--Option to copy time with video. Select between: local, protocols, specifics, all, none. 'none' for disabled, 'all' to copy time for all videos, 'protocols' for copying time only for protocols, 'specifics' to copy time only for websites defined below, 'local' to copy time for videos that are not protocols
+copy_time_method=all
+
+#--Behavior of paste when nothing valid is copied, and no video is running. select between: force, force-noresume
+log_paste_idle_behavior=force-noresume
+
+#--Behavior of paste when nothing valid is copied, and a video is running. select between: timestamp>playlist, timestamp>force, timestamp, playlist, force, force-noresume
+log_paste_running_behavior=timestamp>playlist
+
+#--The time attributes which will be added when copying protocols of specific websites from this list. Additional attributes can be added following the same format.
+specific_time_attributes=[ ["twitter", "?t=", ""], ["twitch", "?t=", "s"], ["youtube", "&t=", "s"] ]
+
+#--The text that will be copied before the seek time when copying a protocol video from mpv
+protocols_time_attribute=&t=
+
+#--The text that will be copied before the seek time when copying a local video from mpv
+local_time_attribute=&time=
+
+#--The time attributes that can be pasted for resume, specific_time_attributes, protocols_time_attribute, local_time_attribute are automatically added
+pastable_time_attributes=[" | time="]
+
+#--Keybind that will be used to copy
+copy_keybind=["ctrl+y", "ctrl+Y", "meta+y", "meta+Y"]
+
+#--The priority of paste behavior when a video is running. Select between: playlist, timestamp, force.
+running_paste_behavior=playlist
+
+#--Keybind that will be used to paste
+paste_keybind=["ctrl+p", "ctrl+P", "meta+p", "meta+P"]
+
+#--Copy behavior when using copy_specific_keybind. Select between: title, path, timestamp, path&timestamp.
+copy_specific_behavior=path
+
+#--Keybind that will be used to copy based on the copy behavior specified
+copy_specific_keybind=["ctrl+alt+y", "ctrl+alt+Y", "meta+alt+y", "meta+alt+Y"]
+
+#--Paste behavior when using paste_specific_keybind. Select between: playlist, timestamp, force.
+paste_specific_behavior=playlist
+
+#--Keybind that will be used to paste based on the paste behavior specified
+paste_specific_keybind=["ctrl+alt+y", "ctrl+alt+Y", "meta+alt+y", "meta+alt+Y"]
+
+#--add below (after a comma) any protocol you want paste to work with; e.g: ,'ftp://'. Or set it as "" by deleting all defined protocols to make paste works with any protocol.
+paste_protocols=["https?://", "magnet:", "rtmp:", "file:"]
+
+#--add below (after a comma) any extension you want paste to work with; e.g: ,'pdf'. Or set it as "" by deleting all defined extension to make paste works with any extension.
+paste_extensions=["ac3", "a52", "eac3", "mlp", "dts", "dts-hd", "dtshd", "yes-hd", "thd", "yeshd", "thd+ac3", "tta", "pcm", "wav", "aiff", "aif", "aifc", "amr", "awb", "au", "snd", "lpcm", "yuv", "y4m", "ape", "wv", "shn", "m2ts", "m2t", "mts", "mtv", "ts", "tsv", "tsa", "tts", "trp", "adts", "adt", "mpa", "m1a", "m2a", "mp1", "mp2", "mp3", "mpeg", "mpg", "mpe", "mpeg2", "m1v", "m2v", "mp2v", "mpv", "mpv2", "mod", "tod", "vob", "vro", "evob", "evo", "mpeg4", "m4v", "mp4", "mp4v", "mpg4", "m4a", "aac", "h264", "avc", "x264", "264", "hevc", "h265", "x265", "265", "flac", "oga", "ogg", "opus", "spx", "ogv", "ogm", "ogx", "mkv", "mk3d", "mka", "webm", "weba", "avi", "vfw", "divx", "3iv", "xvid", "nut", "flic", "fli", "flc", "nsv", "gxf", "mxf", "wma", "wm", "wmv", "asf", "dvr-ms", "dvr", "wtv", "dv", "hdv", "flv", "f4v", "f4a", "qt", "mov", "hdmov", "rm", "rmvb", "ra", "ram", "3ga", "3ga2", "3gpp", "3gp", "3gp2", "3g2", "ay", "gbs", "gym", "hes", "kss", "nsf", "nsfe", "sap", "spc", "vgm", "vgz", "m3u", "m3u8", "pls", "cue", "ase", "art", "bmp", "blp", "cd5", "cit", "cpt", "cr2", "cut", "dds", "dib", "djvu", "egt", "exif", "gif", "gpl", "grf", "icns", "ico", "iff", "jng", "jpeg", "jpg", "jfif", "jp2", "jps", "lbm", "max", "miff", "mng", "msp", "nitf", "ota", "pbm", "pc1", "pc2", "pc3", "pcf", "pcx", "pdn", "pgm", "PI1", "PI2", "PI3", "pict", "pct", "pnm", "pns", "ppm", "psb", "psd", "pdd", "psp", "px", "pxm", "pxr", "qfx", "raw", "rle", "sct", "sgi", "rgb", "int", "bw", "tga", "tiff", "tif", "vtf", "xbm", "xcf", "xpm", "3dv", "amf", "ai", "awg", "cgm", "cdr", "cmx", "dxf", "e2d", "egt", "eps", "fs", "gbr", "odg", "svg", "stl", "vrml", "x3d", "sxd", "v2d", "vnd", "wmf", "emf", "art", "xar", "png", "webp", "jxr", "hdp", "wdp", "cur", "ecw", "iff", "lbm", "liff", "nrrd", "pam", "pcx", "pgf", "sgi", "rgb", "rgba", "bw", "int", "inta", "sid", "ras", "sun", "tga", "torrent"]
+
+#--add below (after a comma) any extension you want paste to attempt to add as a subtitle file, e.g.:'txt'. Or set it as "" by deleting all defined extension to make paste attempt to add any subtitle.
+paste_subtitles=["aqt", "gsub", "jss", "sub", "ttxt", "pjs", "psb", "rt", "smi", "slt", "ssf", "srt", "ssa", "ass", "usf", "idx", "vtt"]
+
+#--Keybind that will be used to open the list along with the specified filter. Available filters: "all", "copy", "paste", "recents", "distinct", "protocols", "fileonly", "titleonly", "timeonly", "keywords".
+open_list_keybind=[ ["y", "all"], ["Y", "all"] ]
+
+#--Keybind that is used while the list is open to jump to the specific filter (it also enables pressing a filter keybind twice to close list). Available filters: "all", "copy", "paste", "recents", "distinct", "protocols", "fileonly", "titleonly", "timeonly", "keywords".
+list_filter_jump_keybind=[ ["y", "all"], ["Y", "all"], ["r", "recents"], ["R", "recents"], ["d", "distinct"], ["D", "distinct"], ["f", "fileonly"], ["F", "fileonly"] ]
+
+####------Logging Settings------####
+
+#--Change to "/:dir%script%" for placing it in the same directory of script, OR change to "/:dir%mpvconf%" for mpv portable_config directory. OR write any variable using "/:var" then the variable "/:var%APPDATA%" you can use path also, such as: "/:var%APPDATA%\mpv" OR "/:var%HOME%/mpv" OR specify the absolute path , e.g.: 'C:\Users\Eisa01\Desktop\'
+log_path=/:dir%mpvconf%
+
+#--name+extension of the file that will be used to store the log data
+log_file=mpvClipboard.log
+
+#--Date format in the log (see lua date formatting), e.g.:"%d/%m/%y %X" or "%d/%b/%y %X"
+date_format=%A/%B %d/%m/%Y %X
+
+#--Change between all, protocols, none. This option will store the media title in log file, it is useful for websites / protocols because title cannot be parsed from links alone
+file_title_logging=protocols
+
+#--add below (after a comma) any protocol you want its title to be stored in the log file. This is valid only for (file_title_logging = "protocols" or file_title_logging = "all")
+logging_protocols=["https?://", "magnet:", "rtmp:"]
+
+#--Prefers to copy and log filename over filetitle. Select between: local, protocols, all, none. 'local' prefer filenames for videos that are not protocols. 'protocols' will prefer filenames for protocols only. 'all' will prefer filename over filetitle for both protocols and not protocols videos. 'none' will always use filetitle instead of filename
+prefer_filename_over_title=local
+
+#--Limit saving entries with same path: -1 for unlimited, 0 will always update entries of same path, e.g. value of 3 will have the limit of 3 then it will start updating old values on the 4th entry.
+same_entry_limit=4
+
+####------List Settings-------####
+
+#--yes is for going up on the first item loops towards the last item and vise-versa. no disables this behavior.
+loop_through_list=no
+
+#--no is for more items to show, then u must reach the end. yes is for new items to show after reaching the middle of list.
+list_middle_loader=yes
+
+#--Show file paths instead of media-title
+show_paths=no
+
+#--Show the number of each item before displaying its name and values.
+show_item_number=yes
+
+#--Change to yes or no. Slices long filenames per the amount specified below
+slice_longfilenames=no
+
+#--Amount for slicing long filenames
+slice_longfilenames_amount=55
+
+#--Change maximum number to show items at once
+list_show_amount=10
+
+#--Keybind entries from 0 to 9 for quick selection when list is open (list_show_amount = 10 is maximum for this feature to work)
+quickselect_0to9_keybind=yes
+
+#--Will exit the list when double tapping the main list, even if the list was accessed through a different filter.
+main_list_keybind_twice_exits=yes
+
+#--To smartly set the search as not typing (when search box is open) without needing to press ctrl+enter.
+search_not_typing_smartly=yes
+
+#--"specific" to find a match of either a date, title, path / url, time. "any" to find any typed search based on combination of date, title, path / url, and time. "any-notime" to find any typed search based on combination of date, title, and path / url, but without looking for time (this is to reduce unwanted results).
+search_behavior=any
+
+####------Filter Settings-------####
+##--available filters: "all" to display all the items. Or "copy" to display copied items. Or "paste" to display pasted items. Or "recents" to display recently added items to log without duplicate. Or "distinct" to show recent saved entries for files in different paths. Or "fileonly" to display files saved without time. Or "timeonly" to display files that have time only. Or "keywords" to display files with matching keywords specified in the configuration. Or "playing" to show list of current playing file.
+
+#--Jump to the following filters and in the shown sequence when navigating via left and right keys. You can change the sequence and delete filters that are not needed.
+filters_and_sequence=["all", "copy", "paste", "recents", "distinct", "protocols", "playing", "fileonly", "titleonly", "keywords"]
+
+#--Keybind that will be used to go to the next available filter based on the filters_and_sequence
+next_filter_sequence_keybind=["RIGHT", "MBTN_FORWARD"]
+
+#--Keybind that will be used to go to the previous available filter based on the filters_and_sequence
+previous_filter_sequence_keybind=["LEFT", "MBTN_BACK"]
+
+#--yes is for bypassing the last filter to go to first filter when navigating through filters using arrow keys, and vice-versa. no disables this behavior.
+loop_through_filters=yes
+
+#--Create a filter out of your desired "keywords", e.g.: youtube.com will filter out the videos from youtube. You can also insert a portion of filename or title, or extension or a full path / portion of a path. e.g.: ["youtube.com", "mp4", "naruto", "c:\\users\\eisa01\\desktop"]
+keywords_filter_list=[""]
+
+####------Sort Settings-------####
+##--available sort: added-asc is for the newest added item to show first. Or added-desc for the newest added to show last. Or alphanum-asc is for A to Z approach with filename and episode number lower first. Or alphanum-desc is for its Z to A approach. Or time-asc, time-desc to sort the list based on time.
+
+#--the default sorting method for all the different filters in the list. select between: added-asc, added-desc, time-asc, time-desc, alphanum-asc, alphanum-desc
+list_default_sort=added-asc
+
+#--Default sort for specific filters, e.g.: [ ["all", "alphanum-asc"], ["playing", "added-desc"] ]
+list_filters_sort=[ ]
+
+#--Keybind to cycle through the different available sorts when list is open
+list_cycle_sort_keybind=["alt+s", "alt+S"]
+
+####------List Design Settings------####
+
+#--The alignment for the list, uses numpad positions choose from 1-9 or 0 to disable. e,g.:7 top left alignment, 8 top middle alignment, 9 top right alignment.
+list_alignment=7
+
+#--The time type for items on the list. Select between: duration, length, remaining.
+text_time_type=duration
+
+#--Time seperator that will be used before the saved time
+time_seperator= 🕒
+
+#--The text that indicates there are more items above. \N is for new line. \h is for hard space.
+list_sliced_prefix=...\h\N\N
+
+#--The text that indicates there are more items below
+list_sliced_suffix=...
+
+#--yes enables pre text for showing quickselect keybinds before the list. no to disable
+quickselect_0to9_pre_text=no
+
+#--Text color for list in BGR hexadecimal
+text_color=ffffff
+
+#--Font size for the text of list
+text_scale=50
+
+#--Black border size for the text of list
+text_border=0.7
+
+#--Text color of current cursor position in BGR
+text_cursor_color=ffbf7f
+
+#--Font size for text of current cursor position in list
+text_cursor_scale=50
+
+#--Black border size for text of current cursor position in list
+text_cursor_border=0.7
+
+#--Pre text for highlighted multi-select item
+text_highlight_pre_text=✅
+
+#--Search color when in typing mode
+search_color_typing=ffffaa
+
+#--Search color when not in typing mode and it is active
+search_color_not_typing=56ffaa
+
+#--Header color in BGR hexadecimal
+header_color=56ffaa
+
+#--Header text size for the list
+header_scale=55
+
+#--Black border size for the Header of list
+header_border=0.8
+
+#--Text to be shown as header for the list
+#--Available header variables: %cursor%, %total%, %highlight%, %filter%, %search%, %listduration%, %listlength%, %listremaining%
+#--User defined text that only displays if a variable is triggered: %prefilter%, %afterfilter%, %prehighlight%, %afterhighlight% %presearch%, %aftersearch%, %prelistduration%, %afterlistduration%, %prelistlength%, %afterlistlength%, %prelistremaining%, %afterlistremaining%
+#--Variables explanation: %cursor: displays the number of cursor position in list. %total: total amount of items in current list. %highlight%: total number of highlighted items.  %filter: shows the filter name, %search: shows the typed search. Example of user defined text that only displays if a variable is triggered of user: %prefilter: user defined text before showing filter, %afterfilter: user defined text after showing filter.
+
+header_text=📋 Clipboard [%cursor%/%total%]%prehighlight%%highlight%%afterhighlight%%prefilter%%filter%%afterfilter%%presort%%sort%%aftersort%%presearch%%search%%aftersearch%
+
+#--Sort method that is hidden from header when using %sort% variable
+header_sort_hide_text=added-asc
+
+#--Text to be shown before or after triggered variable in the header
+header_sort_pre_text= \{
+header_sort_after_text=}
+header_filter_pre_text= [Filter:
+header_filter_after_text=]
+header_search_pre_text=\h\N\N[Search=
+header_search_after_text=..]
+header_highlight_pre_text=✅
+header_highlight_after_text=
+header_list_duration_pre_text= 🕒
+header_list_duration_after_text=
+header_list_length_pre_text= 🕒
+header_list_length_after_text=
+header_list_remaining_pre_text= 🕒
+header_list_remaining_after_text=
+
+#--Copy seperator that will be shown for copied items in the list
+copy_seperator= ©
+
+#--Paste seperator that will be shown for pasted item in the list
+paste_seperator= ℗
+
+####-----Time Format Settings-----####
+##--in the first parameter, you can define from the available styles: default, hms, hms-full, timestamp, timestamp-concise "default" to show in HH:MM:SS.sss format. "hms" to show in 1h 2m 3.4s format. "hms-full" is the same as hms but keeps the hours and minutes persistent when they are 0. "timestamp" to show the total time as timestamp 123456.700 format. "timestamp-concise" shows the total time in 123456.7 format (shows and hides decimals depending on availability).
+##--in the second parameter, you can define whether to show milliseconds, round them or truncate them. Available options: 'truncate' to remove the milliseconds and keep the seconds. 0 to remove the milliseconds and round the seconds. 1 or above is the amount of milliseconds to display. The default value is 3 milliseconds.
+##--in the third parameter you can define the seperator between hour:minute:second. "default" style is automatically set to ":", "hms", "hms-full" are automatically set to " ". You can define your own. Some examples: ["default", 3, "-"],["hms-full", 5, "."],["hms", "truncate", ":"],["timestamp-concise"],["timestamp", 0],["timestamp", "truncate"],["timestamp", 5]
+
+copy_time_format=["timestamp-concise"]
+osd_time_format=["default", "truncate"]
+list_time_format=["default", "truncate"]
+header_duration_time_format=["hms", "truncate", ":"]
+header_length_time_format=["hms", "truncate", ":"]
+header_remaining_time_format=["hms", "truncate", ":"]
+
+####------List Keybind Settings------####
+#--Add below (after a comma) any additional keybind you want to bind. Or change the letter inside the quotes to change the keybind
+#--Example of changing and adding keybinds: --From ["b", "B"] To ["b"]. --From [""] to ["alt+b"]. --From [""] to ["a" "ctrl+a", "alt+a"]
+
+#--Keybind that will be used to navigate up on the list
+list_move_up_keybind=["UP", "WHEEL_UP"]
+
+#--Keybind that will be used to navigate down on the list
+list_move_down_keybind=["DOWN", "WHEEL_DOWN"]
+
+#--Keybind that will be used to go to the first item for the page shown on the list
+list_page_up_keybind=["PGUP"]
+
+#--Keybind that will be used to go to the last item for the page shown on the list
+list_page_down_keybind=["PGDWN"]
+
+#--Keybind that will be used to navigate to the first item on the list
+list_move_first_keybind=["HOME"]
+
+#--Keybind that will be used to navigate to the last item on the list
+list_move_last_keybind=["END"]
+
+#--Keybind that will be used to highlight while pressing a navigational keybind, keep holding shift and then press any navigation keybind, such as: up, down, home, pgdwn, etc..
+list_highlight_move_keybind=["SHIFT"]
+
+#--Keybind that will be used to highlight all displayed items on the list
+list_highlight_all_keybind=["ctrl+a", "ctrl+A"]
+
+#--Keybind that will be used to remove all currently highlighted items from the list
+list_unhighlight_all_keybind=["ctrl+d", "ctrl+D"]
+
+#--Keybind that will be used to load entry based on cursor position
+list_select_keybind=["ENTER", "MBTN_MID"]
+
+#--Keybind that will be used to add entry to playlist based on cursor position
+list_add_playlist_keybind=["CTRL+ENTER"]
+
+#--Keybind that will be used to add all highlighted entries to playlist
+list_add_playlist_highlighted_keybind=["SHIFT+ENTER"]
+
+#--Keybind that will be used to close the list (closes search first if it is open)
+list_close_keybind=["ESC", "MBTN_RIGHT"]
+
+#--Keybind that will be used to delete the entry based on cursor position
+list_delete_keybind=["DEL"]
+
+#--Keybind that will be used to delete all highlighted entries from the list
+list_delete_highlighted_keybind=["SHIFT+DEL"]
+
+#--Keybind that will be used to trigger search
+list_search_activate_keybind=["ctrl+f", "ctrl+F"]
+
+#--Keybind that will be used to exit typing mode of search while keeping search open
+list_search_not_typing_mode_keybind=["ALT+ENTER"]
+
+#--Keybind thats are ignored when list is open
+list_ignored_keybind=["h", "H", "r", "R", "b", "B", "k", "K"]
+
+######----End of Settings----######